ECS G31T-M


This board installed very well except for the on board Realtek RTL8101E 10/100 LAN (co-lay RTL 8111B GigaLAN). We tested with trixbox 2.4.2. The sataraid otion only works if you use a SATA CD-ROM. IRQ assingment looks good. Use a PCI NIC until the next kernel release.

Specs:

G31T-M (V1.0)

Intel® latest Bearlake value chipset and graphics designed for use with the Intel® Core 2 Duo, Wolfdale processors in desktop platforms .

CPU LGA775 socket for latest Intel® *Core 2 Quad/Core 2 Duo / Pentium Dual-core (E21xx series)/Celeron 4xx processors
Supports Intel 45nm Core 2 Quad(Yorkfield) and Core2 Duo(Wolfdale) series processors. (please refer to the CPU support list for more detail)
FSB 1333/1066/800 MHz
* G31T-M is capable to support Core 2 Quad Q6700 G0 and Q6600 G0



CHIPSET Intel® G31 & ICH7
North Bridge: Intel® G31
South Bridge: Intel® ICH7



GRAPHICS Integrated Intel® Graphics Media Accelerator 3100 (GMA3100)
Max Dynamic Video Memory : 287MB (Vista) / 384MB (XP)



MEMORY Dual-channel DDR2 memory architecture
2 x 240-pin DDR2 DIMM socket support up to 4 GB
Support DDR2 800/667 DDR SDRAM



EXPANSION SLOT 1 x PCI Express x16 slot
1 x PCI Express x1 slot
2 x PCI slots



STORAGE Supported by Intel®ICH7
2 x Ultra DMA100/66 devices
4 x Serial ATA2 devices



AUDIO Realtek ALC662 6-channel HD audio CODEC



LAN Realtek RTL8101E 10/100 LAN (co-lay RTL 8111B GigaLAN)



REAR PANEL I/O 1 x PS/2 keyboard & PS/2 mouse connectors
4 x USB ports
1 x VGA port
1 x Serial port (COM1)
1 x RJ45 LAN connector
1 x Audio port



INTERNAL I/O CONNECTORS & HEADERS 1 x 24-pin ATX Power Supply connector
1 x 4-pin ATX 12V connector
1 x FDD connector supports two 360K~2.88MB FDDs
4 x Serial ATA connectors
2 x USB 2.0 headers support additional 4 USB Ports
1 x Clear CMOS header
1 x Front panel header
1 x Front panel audio header
1 x LPT1 header
1 x Speaker header
1 x SPDIF out header
CD in header
CPUFAN/SYSFAN connectors



SYSTEM BIOS AMI BIOS with 8Mb SPI ROM
Supports Plug and Play 1.0A, APM 1.2, Multi Boot, DMI
Supports ACPI revision 1.0 specification



FORM FACTOR Micro-ATX Size, 244mm*200mm